“BöttcherPro Silicone Spray (12×0.4l spray)” has been added to your basket. View basket
64,80 € – 490,00 €
BöttcherFount S-3010 Fountain Solution Additive
BöttcherFount S-3010+ is a fountain solution additive for sheet-fed offset and continuous form printing.
- use at a concentration of 2 – 3 % for IPA-reduction to 6 – 8 %
- very stable ink-/water-balance
- reduced water pick-up of the ink, therefore higher ink densities obtained
- fast start-up and stable printing for long runs
- for water hardness 5 – 20° dH (total hardness)
- pH-value 4.8 – 5.0 (depending on water hardness)
- reduced calcium deposits on ink rollers
- suitable for UV and Hybrid inks as well as special inks containing metallic pigments corrosion inhibited
minimises build-up of paper dust and ink on the blanket suitable for CTP plates
effective plate protection during press stops
suitable for copper rollers
increased conductivity per % input: 390 μS/cm density 1.10 (kg/l)
Before applying BöttcherFount S-3010+, the fountain system must be completely emptied and cleaned thoroughly, preferably using BöttcherPro Hydroclean.
Use BöttcherPro Calcit as a re-hardener for RO and soft water.
- Description
- Additional information
- Vendor Info
- More Products
Description
BöttcherFount S-3010+ is a fountain solution additive for sheet-fed offset and continuous form printing.
Additional information
| Weight | 150 kg |
|---|---|
| Dimensions | 120 × 80 × 80 cm |
| Volume | 20 litres, 200 litres, 1000 litres |
Vendor Information
- Store Name: Pressinspection
- Vendor: Pressinspection
- No ratings found yet!
